Components : support pillar, lower base, lever system, miners, foot supports, turntable.
The support pillar of the equipment needs to be made of steel pipe, with a thickness of at least 3 mm and a minimum diameter of 133 mm, being mounted on a platform with holes for fixing with the foundation. All mobile components that support the weight of the body will be made of steel pipe with a minimum diameter of 48 mm and a thickness of at least 2.8 mm, and the miner and leg supports with a minimum diameter of 42 mm. The rotating disk and leg supports will be made of LLDPE polyethylene (linear low-density polyethylene) by "rotomoulding" technology.
The static connected elements will have a minimum diameter of 33mm and 27mm, being made of steel pipe with a minimum thickness of 2.8mm.
All articulated nodes will be equipped with reinforced closed-type bearings. Static components will be built from a single element. In the case of mobile elements, the movement will be ensured by means of a rocking system and joints resistant to the external environment. All moving elements, heads, screws, nuts need to be covered with protective plastic covers. The metal elements need to be sandblasted and painted in an electrostatic field, in two layers with a minimum thickness of 100 microns to give them resistance to the external environment.
Materials : steel, LLDPE, rubber, zinc-plated fasteners, plastic caps in the places of thread sutures.
The foundation of the construction will have minimum dimensions of LxWxH=300x300x500 mm.
Requirements for installation : To ensure safe and reliable operation, all supporting elements are to be deepened into the soil (earth) not less than 0.50m to increase rigidity, then following the concreting process (concrete BC 300). The assembly of the elements must exclude the possibility of their disassembly, without the use of special purpose tools.
Minimum dimensions : length - 1228mm, Width - 508mm, Height - 1406mm. In addition to the space occupied by the equipment, according to the regulations in force, a minimum impact area of 1.5 m will be provided.
Download DWG drawing
